Bosch Power Tools deliver stronger performance and lasting reliability. The Bosch 1900 series 7 In. and 9 In. grinders are redefining innovation. The line is powered by A new, ultra-efficient 4 HP motor. It utilizes the best vibration control system on the market. If that isn't enough, they are also the lightest large angle grinders available, weighing up to 20% less than any comparable competitive model.
Maximum power at minimum weight - up to 20% lighter than comparable tools
Patented vibration control with soft grip - reduces vibration by up to 50%
Quick adjust guard system - quickly adjusts and locks in place for added protection
Tri-metal switch design - helps prevent accidental start ups
AC/DC compatibility - extends tool versatility to DC outlets such as welders and generators
Amperage: 15 Amps
Weight: 11.4 lbs.
Arbor Size: 5/8-11
Rent from $29.00
Our 22T Horizontal/Vertical splitter is designed for easy transition between horizontal and vertical configurations. The horizontal mode is easiest for most splitting tasks. But when you come across an extra big round, you can save yourself a lot of strain by simply pulling out a pin, easily rotating the unit into its vertical position, and splitting the log on the ground...no lifting required!
An easy-starting DR 6.6 HP engine powers the 2 stage pump (8.1 GPM), generating 3400psi of splitting force. Logs up to 30" in diameter and up to 24" long are no problem. And the 16-second cycle time makes it one of the fastest hydraulic splitters in its class.
A 2" ball hitch with safety chains comes standard, allowing you to tow the unit at speeds up to 45 mph on its big 16" DOT-approved tires. The jackstand folds up for transport, locking into place with a simple cotter pin.
Rent from $79.00
Hardened steel bit for use with SDS-Max drive rotary hammers. Ideal for light chipping and chiseling of tile, mortar, glazing compounds and other masonry products.
Rent from $8.00
Floor Scraper 6" wide x 25" long for SDS-Max drive rotary hammers. Scraper blade is replaceable.
Use for removing laminate, glue down and other flooring materials.
Rent from $30.00
Use this tool with a rotary hammer for easy digging.
4-1/2" wide spade x 17" long for use with SDS-Max drive rotary hammers.
Rent from $10.00
Fits Bosch SDS-max hammers, competitive SDS-max® driver hammers
Use for driving 5/8" and 3/4" ground rods
Rent from $10.00
Generac’s GP6500 COsense® 49ST portable generator offers PowerRush™ Advanced Technology, which delivers more than a 40% increased starting capacity* allowing you to do more with less. Generac’s OHV engine and large-capacity steel fuel tank ensures extended engine life and run times, while the steel tube cradle provides added strength. The low-oil feature protects the generator from damage. The GP6500 COsense® 49ST can be easily transported across rough or difficult terrain with the heavy-duty wheels and easy fold-down handle. Even maintenance is a breeze, with the hour meter keeping track of necessary upkeep at regular intervals.
Rent from $70.00
The is a commercial-grade, ultra-portable, handheld trencher that is used for: irrigation, low-volt lighting, erosion control, fiber optic, root barrier, perimeter fence, gas/electric drops, and many more applications. The GeoRipper trenches quickly and efficiently in every type of soil, is able to cut a tight radius, and causes little turf or ground disturbance to allow for fast back-filling and quick site cleanup.
Rent from $79.00
Need to cut a little higher? Quickly and easily get to those hard to reach branches with the adjustable shaft HT 131 STIHL telescoping pole pruner. With more power this low-emission tool combines efficient long-reach capabilities with compact storage ability.
Rent from $50.00
The MS 271 FARM BOSS® replaces the mighty MS 270 with a saw that’s loaded with features and technology. It starts with a highly efficient engine that delivers 20% longer run times between refuelings - while cutting exhaust emissions in half compared to the MS 270. There’s also a pre-separation air filtration system that’s so effective, your air filter can last up to five times longer (now that’s high-performance). All engineered into one compact, ergonomic design.
Rent from $50.00
The Bosch GBM9-16 Mixer handles a wide variety of materials, from paint to plaster and more. It has variable speed control, and it has both forward and reverse operation at 0-700 no-load RPM. The all-ball bearing motor and precision-cut steel gears deliver plenty of power for high-torque mixing jobs. Higher speed is best for materials with low viscosity such as paint or sealing compounds. Lower speed, higher torque mixing works for mortar or epoxy resin. It features a 360° rotatable D handle, for maximum comfort. It diminishes vibration while allowing the user to adjust to the desired position. The heavy-duty 5/8 In. keyed chuck allows the tool to support a large variety of accessories. It features a tough, lightweight magnesium front housing for durability. It has a two-finger trigger design for easier mixing.
9.0 Amps
5/8" Keyed Chuck, No Load RPM 0-700, Max.Hole Diameter in Steel-Twist Drill Bit 1/2"
Weight 6.6 lbs., Height 10", Length 14", Width 2.5"
Rent from $15.00
This wall and floor scanner features radar technology, which is accurate and reliable, indicating the correct material. The Bosch D-TECT200C Wall/Floor Scanner delivers advanced precision. Not just a stud finder, it detects live and non-live cables, rebar, metal, plastic pipes and wooden studs, with depth indication of the object. It has leakage detection, which allows fast discovery of a leak. The scanner’s screenshot feature supports quick-and-easy documentation. It can be saved and transferred to a computer for further analysis. The USB-C™ and SD card slot enables quick data transfer. The spot view delivers fast results and measurements in small places to scan (such as corners), and the scanner provides about a 7-1/2 In. measuring depth to detect even deep objects. The 3.5 In. color display provides clear readability, and the user interface is intuitive, providing clear illustration of detected objects. It runs on Bosch 12V Max Li-ion batteries for outstanding runtime.
Max Detection Depth; Copper Wiring 3", Steel/Rebar 8", Copper Pipe 8"
Rent from $50.00
A powerful 14 Amp motor with Constant Response circuitry. This provides a constant hard-hitting 12.4 Ft./Lbs. Of impact energy. Variable speed control allows users to adjust the impact force to the material being removed. The SDS-max® tool holder provides you with the largest assortment of steel accessories for every job. The padded rear handle absorbs shock for operator comfort. Ideal tool for tile, brick, stucco removal, surface preparation and concrete demolition.
14.0 Amps, Impact Energy/EPTA 12.4 Ft/lbs. EPTA
SDS-Max Drive System
Weight 22.5 lbs., Length 22.5", Height 12", Width 5"
Rent from $45.00
The Bosch 11255VSR SDS-plus® Bulldog™ Xtreme 1 In. Rotary Hammer is a versatile, handy tool. From anchoring to large material breaking, it gets the job done right the first time. Engineered in the tradition of legendary Bulldogs, this powerful hammer delivers 2.0 Ft.-Lbs. of impact energy and 0-5,800 no-load BPM, but it weighs just 6.7 Lbs. The multifunction mode selector allows users to easily select among three modes of operation: rotary hammer, rotation only and hammer only. To optimize the chiseling angle, it has Vario-Lock positioning that rotates and locks the chisel in one of 36 different positions. The hammer is designed with an ergonomic D-handle for comfort. It features a variable-speed reversing trigger for accurate bit starting, and a Bosch-exclusive rotating brush plate, for equal power in forward and reverse.
8.0 Amps, SDS-Plus Drive System, Optimal Concrete Capacity 3/16" - 5/8"
Max. Bit/Hole Diameter 1", Max. Hole Diameter in Concrete-Thin Wall Core Bit 2-5/8"
Weight 6.7 lbs., Height 6", Length 17.25", Width 3.5"
Rent from $24.00
The Bosch RH1255VC SDS-max® 2 In. combination hammer has Turbo Power, which gives the tool a torque and speed boost in hammer mode. It also provides 14.1 Ft.-Lbs. of impact energy for top-rated power. At under 27 Lbs., it has outstanding performance-to-weight ratio in a 2 In. hammer. It features Vibration Control for additional operator control while mitigating vibration in the hammer mechanism and in the handle. This hammer provides Constant Response circuitry for smooth starts, precise hole placement and constant speed under load. Vario-Lock positioning permits rotating and locking the chisel with precision. And the SDS-max® bit system provides toolless bit changes.
15.0 Amps, Impact Energy/EPTA 14.1 Ft/lbs. EPTA
SDS-Max Drive System, Max. Bit Diameter 2", Max. Hole Dia. in Concrete-Core Bit 6"
Weight 26.2 lbs., Length 23.5", Height 11.3", Width 5"
Rent from $45.00
The DWX723 Heavy-Duty Miter Saw Stand is designed to work with all brands of miter saws. Lightweight aluminum construction (29 lbs.) allows for easy transport and leg lock levers allow quick set up. 5-1/2' beam extends to support up to 16 ft. of material and up to 500 lbs.
Additional Features
Legs provide superior support and fold for easy storageLeg Lock Levers allow for fast and easy set upMiter saw mounting brackets allow easy and secure mounting of miter saw to standWork stops/supports can be repositioned quickly anywhere along the railNon-marring feet on tool mount will not scratch materialExtension lock levers allow for fast and secure tightening of extensionsMiter saw not included
Universal design works with all brands of miter sawsLightweight aluminum construction (29 lbs.) allows for easy transport to and from the jobsite5-1/2' beam extends to support up to 16 ft. of material and up to 500 lbs.
Rent from $12.00
The DEWALT DWS779 sliding compound miter saw is precision at it's toughest, delivering accuracy and capacity for everyday jobsite use.. This miter saw is designed with a powerful 15 Amp, 3800 RPM motor that delivers extended power and durability. Tall sliding fences support 7-1/2 in. of crown nested and up to 2x14 dimensional lumbers at 90° and 2x10 at 45°. A cam lock miter handle with detent override delivers quick and accurate miter angles.
Stainless steel miter detent plate with 10 positive stops
Precise miter system and machined base fence support
Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles
Rent from $32.00
Walk-Behind Flat Saws solve short-run cutting applications including utility installation, road repair, and trenching. This 14" saw is constructed of thick steel for longevity and cuts up to 4 ¾" deep.
Heavy-Duty Anti-Vibration engine mount
Screw boot belt tensioner prevents frame damage
14" blade capacity
7-gauge steel blade guard with welded protective segment flap
Heavy-Duty lifting bail
13 HP gasoline engine
Heavy-Duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
Solid-Steel lifting handles
High quality molded rubber wheels
Rent from $55.00
The TS 420 is so popular, it could possibly be called "the standard" to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 - including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14" cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.
Rent from $40.00
The Bosch RH540M SDS-max® 1-9/16 In. Combination Hammer is a rotary hammer and hammer-only tool designed for concrete contractors and professional remodelers who need a powerful and versatile tool. It delivers 6.1 Ft.-Lbs. of impact energy while weighing in at only 15.2 Lbs. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust. Its SDS-max® bit system allows tool-free and one-handed bit changes. The Vario-Lock mechanism lets users angle the chisel into 12 different positions to optimize the working angle. The hammer has a Dual Mode Selector Knob and service minder brushes, which clearly indicate when preventive maintenance is required.
12.0 Amps
SDS-Max Drive System, Max. Bit Diameter 1-9/16", Max. Hole Dia. in Concrete-Core Bit 4" and 2-1/2" in Concrete-Thru Hole Bit
Weight 15.2 lbs., Height 10.5", Length 19", Width 4"
Rent from $30.00
